|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
 ;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
 ;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
 ;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
 ;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
VCR operation
Automatic operation
Contents
To play back a tape which does not have a safety tab (this means you cannot record on to it) insert a tape. The set will at once switch itself on if the set is in standby mode and automatically perform the following sequence : PLAY ¡æ STOP ¡æ REWIND ¡æ EJECT To play back a video cassette tape which has a safety tab (this means that you have recorded on it and left the tab untouched) insert a tape. The set will switch itself on if the set is in standby mode. Then press the PLAY button to play back.
Manual operation
1. Insert a video cassette tape. 2. Press the PLAY button. The recording on the tape appears on the screen. 3. To stop playback, press the STOP button. 4. To take out the tape, press the EJECT button.
PLAY
EJECT
STOP
Tape tracking control
AUTO TRK
Tracking ensures that the tape is correctly aligned with the playback head. It works only during playback and its principle purpose is to minimize picture shake and noise (fuzzy lines across the picture). It is adjusted automatically or manually. Auto tracking Whenever playback starts, auto tracking automatically adjusts the picture. The display AUTO TRK will appear while the best picture is selected. To reactivate auto tracking, press the AUTO TRK button on the remote control handset. Manual tracking You can manually adjust the picture by pressing the TRK +/buttons.
14
|
|
 |
> |
|